Widespread Using And Colorful Picture 12KW Garment Embossing Machine
Product Description
Product example picture
Parameter
Technical parameters |
Model |
ZJ-TRA3 |
Mechanical voltage |
380V50Hz |
Power |
12KW |
Electronic temperature control |
0-300ºC Adjustable |
Over the table size |
400*300 mm |
Lower table size |
450*350 mm |
Machine size |
1080*1400*1850 mm |
Hydraulic cover |
3T |
Hydraulic cylinder |
2pcs 63*200 |
Machine weight |
650kg |
Production speed |
8-10 Seconds per time |
Floor to machine table size |
860 mm |
Mold hole distance |
350 mm |
380V power supply
|
Where the machine is to be placed, install an independent 32A or above air switch with neutral wire (3 live wire, 1 ground wire, 1 null wire). |
Using:This machine is mainly used for clothing embossing, denim embossing, shoe material embossing, trademarks, leather bags, sports shoes, craft gifts, luggage, denim clothing and so on.
Machine features
1. Machine is oil pressure type, oil pressure up and down speed can be adjusted.
2. Double station model with two working stations.
3. Oil pressure adjustable stroke, can produce clothing embossing, because there is a lower limit.
4. The mechanical starting mode has a double button switch to ensure the safety of production personnel.
5. Oil pressure is equipped with high precision double guide rod, embossed products are more accurate; In addition, the oil pressure output can be adjusted through the pressure regulating valve. Our company's pressure regulating valve can separate the left and right pressures (most manufacturers on the market do not have this function).
6. Upper and lower mold independent heating function, automatic constant temperature, temperature error plus or minus 1 degree (using flat plate
Mold installation mode, mold only need to be installed and fixed on the plate, simple and convenient).
7. Adjustable temperature: room temperature 0-300 degrees arbitrary adjustable up and down independent temperature control
8. Use of accessories: The electrical components of the whole machine are imported joint venture brand One.
9. Frame features: The machine internal four-column structure, oil pressure output stable frame strong and firm, the machine body with powder paint process, anti-scratch, fading, anti-rust, with a few years of cloth a sassafras like new.
Use process
1. Use a punch press to cut the material.
2. Make the mold.
3. Put the material under the head of the machine, press the button with both hands, the the machine head will automatically fall. After embossing the product, the machine head will rise automatically. .The mold pattern is the same as the product pattern produced by the machine.
Certificate
Factory Related Pictures